hi,
Der Aktuelle Kern der XP Reihe ist BARTON.
Dein Bios ist Müll.
Hier die Updates:
BIOS ID:1.5
Please use the AWDFLASH v8.24F flash utility to update the AN7 BIOS.
Added Auto-Shutdown function when CCMOS jumper is set to pins 2-3. The correct CCMOS jumper should be on pins 1-2; in case it is placed on 2-3, the CPU core voltage will be abnormally high, an the system will shut down automatically to protect the CPU from damage.
Fixed an issue where USB-ZIP will be detected as a harddisk.
Updated SI3112 SATA BIOS to v4.2.47.
Revised the characters in "Wakeup by Alarm".
Enhanced USB 2.0 device compatibility, "Integrated Peripherals / OnChip PCI Device / USB 2.0 Device Compatible / Disabled -> Enabled".
Fixed an issue where SCSI boot ID cannot be selected when certain SCSI cards are installed.
Fixed an issue where SATA HDD boot up will fail if a PS/2 mouse is not installed.
Fixed an issue where the system will show 119 degrees under certain circumstances.
BIOS compile date: 03/04/2004.
an714.exe Bios Issue Date:2004/01/06
BIOS ID:1.4
Please use the AWDFLASH v8.24F flash utility to update the AN7 BIOS.
Changed default RTC year to 2004.
Updated Silicon Image 3112 controller ROM to version 4.2.43.
Added CPU fan fail warning option.
Added AGP frequency on the fly option.
Saved CPU default ratio to µGuru.
Added SATA ROM control option.
Fixed mouse power on fails to function when using certain mice.
Enhanced compatibility with WD400AB hard disk.
Synchronized FanEQ temperature settings with OC Guru.
Reduced the time it takes to resume from STR state when using Windows 98 and Windows ME.
Added "Full screen logo show" option.
BIOS compile date: 01/06/2004
an713.exe Bios Issue Date:2003/11/13
BIOS ID:1.3
Please use the AWDFLASH v8.24F flash utility to update the AN7 BIOS.
Fixed the problem where after pressing "F8" for OC on the fly and then pressing ESC, the image on screen will become distorted.
Fixed the wake on ring fail problem.
Fixed the problem where a SATA hard disk will not respond after resuming from S3 mode.
Updated DRAM DMI information and revised the wording of memory status from "DDR SDRAM at Bank" to "DDR at DIMM" in the system configuration table.
Fixed the problem where the DRAM timing is not changed after saving and exiting the BIOS.
Enhanced SATA device stability.
Added resume from S3/S4 mode using USB devices.
Fixed the problem where the system cannot boot into Windows if
The OS is installed in the SATA hard disk when both the SATA and PATA hard disks are present
The PATA hard disk is removed after the OS installation.
BIOS compile date: 11/13/2003
an712.exe Bios Issue Date:2003/11/11
BIOS ID:1.2
Please use flash utility AWDFLASH v8.24F to update AN7 BIOS.
First release.
BIOS compile date: 11/11/2003
Lade dir also das Update 1.5 runter.Aber bitte lass dir helfen der so was schon mal gemacht hat oder befolge Anweisungen ganz genau.Dazu brauchst du aber auch einen alten Riegel der läuft.
http://www.abit.com.tw/page/de/index.php
Ich bin aber wie Dragonmaster der Meinung das dieses Board eventuel 1GB (CL2.5) Noname nicht akzeptiert.Es unterstützt alle CPUs.Daher kein Problem.
Also:anderen Riegel besorgen,Update machen,dann testen ob Riegel geht ansonsten neuen (kleiner) kaufen. (2*512?)
cu Linux